{"id":760,"date":"2008-10-03T17:57:14","date_gmt":"2008-10-03T17:57:14","guid":{"rendered":"http:\/\/www.n5hrk.com\/blog\/?p=760"},"modified":"2018-08-10T16:54:52","modified_gmt":"2018-08-10T21:54:52","slug":"deliverymen-bearing-gifts","status":"publish","type":"post","link":"http:\/\/www.n5hrk.com\/blog\/mega-squirt-efi\/xj550\/deliverymen-bearing-gifts\/","title":{"rendered":"Deliverymen bearing gifts…"},"content":{"rendered":"

 <\/p>\n

I received two packages today, one with the silicone intakes (I swore I ordered the blue ones, but they are black and the order shows black. Oh well…) and one with the bank angle switch.<\/p>\n

The intakes are about the same length as the neoprene ones I have now, which I pretty much expected<\/p>\n

I also spent some time at work redrawing the trigger wheel with thoughts of sending off the order to eMachineShop.com. When I got home, however, I tore into the project and have produced a reasonably good trigger wheel made from 16ga steel I had laying around from an armor project. It seems reasonably well balanced for hand made.<\/p>\n

\"\"<\/a><\/p>\n

The current mounting is a significant compromise to the plan. I found a scrap of material that is the proper length, but not really the proper diameter to fill the space between the crankshaft and the trigger wheel. It is functional, but I suspect it may not be very robust. I intend to return to plan A, though I may need to start and run the engine before then. Once I have verified that it is properly placed, I will apply threadlock and\/or lockwashers to secure it until I can implement the proper spacer.<\/p>\n

My biggest concern is that the 16ga steel may not be massive enough to generate a good signal. With the wheel in place as shown above, it generates a signal that of about 0.485V when cranking. In the MegaManual section on EDIS, it indicates that 0.5V may be the minimum usable signal.<\/p>\n

We’re planning on riding this weekend, so it will probably be Tuesday night before I get another chance to work on Buzz. At that point, however, I will be ready to wire up the EDIS module. It has occurred to me that I can probably use the stock coils, at least temporarily, if I can’t acquire a Ford coilpack between now and then. With a little luck, I can put the EDIS module physically where the stock ignitor is, especially now that there is a smaller fuse panel there.<\/p>\n","protected":false},"excerpt":{"rendered":"

  I received two packages today, one with the silicone intakes (I swore I ordered the blue ones, but they are black and the order shows black. Oh well…) and one with the bank angle switch. The intakes are about the same length as the neoprene ones I have now, which I pretty much expected … Continue reading Deliverymen bearing gifts…<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"class_list":["post-760","post","type-post","status-publish","format-standard","hentry","category-xj550"],"_links":{"self":[{"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/posts\/760","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/comments?post=760"}],"version-history":[{"count":4,"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/posts\/760\/revisions"}],"predecessor-version":[{"id":1809,"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/posts\/760\/revisions\/1809"}],"wp:attachment":[{"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/media?parent=760"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/categories?post=760"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.n5hrk.com\/blog\/wp-json\/wp\/v2\/tags?post=760"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}